Is There an Easy Way to Install Stockade Fencing

Download Commodity

Download Article

Co-ordinate to Robert Frost, good fences make good neighbors. Fences maintain privacy and peace between neighbors, and are likewise good for keeping pets and young children inside your m and keeping predators out. You tin can reduce the expense significantly by learning to plan the task properly and installing the posts and panels yourself.

1. 1

   Check building codes. Contact your local municipality or homeowner association to ask about codes, restrictions, and permits relevant to your project.

   • It'south also wise to talk over the project with your neighbors. If the contend is on an adjoining belongings line, you may be able to split the costs 50/50.

2. 2

   Measure the area to exist fenced. Depending on the size and shape of the area in which yous're installing fencing, you'll need to figure out how much fencing you'll demand to enclose the given space.

   • If you just want a decorative fence, mensurate the length of the side of your yard you want to fence. If you desire an enclosed fence, measure the full area and the length of each side.
   • If y'all want a prefabricated argue, mensurate a unmarried panel before ownership. Mark off this altitude along your planned argue line and stake the position of each contend panel. You'll end up setting fence posts at each stake, adjustment them with the twine line and mounding soil around them higher up ground level.

   Advertizing

3. 3

   Locate and mark all buried utility lines. Telephone call the local utilities companies to determine the locations of your lines if y'all aren't sure. Practice not dig anything until the utility company representatives accept identified and marked all the buried lines. You tin can as well call 811 in some areas to go information near power lines.

4. iv

   Buy an appropriate corporeality of fencing for the space. Take your measurements to the hardware store and purchase fencing that suits your tastes and your needs. Larger wooden fences might need to be cut from scratch, while prefabricated fences are available in a wide multifariousness of styles and methods of installation.

   • If you lot're ownership a pre-fabricated contend, take your measurements to the store and shop around for possibilities.

5. 5

   Acquire fence posts. If you desire to cut your ain argue posts, yous'll need woods that will concur up underground. This can be wood rated for directly ground contact, force per unit area-treated forest which has been injected with preservative, or wood coated with forest preservative at dwelling (as described beneath).

   • Gate posts and corner posts are usually larger than the residue.

6. 6

   Stain the fence posts and panels. Before installing the fence, you'll need to complete any staining and painting that y'all'd like on the forest. It'll be easier to do this before you put information technology together. This should definitely be done on debate posts that you're cutting yourself, and also peradventure on pre-fab models that are untreated. Castor the posts and fencing panels with oil-based woods stain. Wipe off excess stain and allow everything to dry completely.

7. vii

   Utilise wood preservative to fence posts. If the wood is not force per unit area-treated, paint the contend posts with copper naphthenate or another wood preservative to 1-third of their superlative and allow them to dry thoroughly, following the manufacturer's instructions. This hinders rot from the contact with the clammy soil and the undercover sections of the posts. Care for all cut ends with preservative also.

   • Alternatively, you lot can pigment on but the below-footing portions in advance, to reduce mess during installation. Treat the rest with an airless sprayer once the fence is consummate.
   • Follow all safety instructions on the preservative characterization. Copper naphthenate can irritate peel, eyes, and lungs.^[1]

8. viii

   Place a stake at the location for each corner debate post. Whatever kind of argue you're installing, it's a good idea to mark each corner of the fenced-in surface area with stakes. At each corner, plant a small wooden stake to mark the spot clearly.

Advertisement

1. 1

   Dig a hole for the first post at the corner of the fence. To go started, you'll need to start installing the debate posts, which will grade the corners of the fence. Dig a hole that is twice the diameter of the post and one-third of the meridian of the post, using a posthole digger. Make the bottom of the hole slightly larger than the top to brand certain yous'll be able to seat it properly and deeply.

   • It's a expert idea to place the dirt you remove on a tarp, so y'all'll be able to keep information technology in an even pile for putting it back in and securing the post. Remove any large rocks and roots from the hole. If necessary, cut large roots complimentary.
   • If you're going to be excavation a lot of holes or setting a lot of posts, consider renting a gas-powered pigsty digger. This machine requires a strong helper and close attending to safety precautions to avoid injury.

2. 2

   Install some gravel. Add 4 to five inches (10 to xiii cm) of gravel to the hole, spreading it evenly across the bottom. This allows proper drainage abroad from the contend posts during inclement weather, extending the life of the argue itself.

   • Pea-sized landscaping gravel, frequently merely called "pea gravel" is unremarkably the nearly affordable and effective type of gravel for the task.

3. three

   Seat the first fence post. Set a corner or end post into the hole, and add 6 to 8 inches (xv to 20 cm) of soil. Check the level of the fence mail service by placing a carpenter'southward level on at to the lowest degree ii sides. When the debate post is level, tamp the soil to meaty it solidly into the hole. Add another half-dozen to 8 inches (15 to 20 cm) of soil, check the level and tamp the soil. Repeat until you have filled the pigsty completely.

   • Instead of filling the holes back up with soil, yous can mix upward a pocket-sized batch of concrete and utilise that to fill in above the gravel. For an even easier time, there'south a variety of physical specifically for argue posts, which can be added dry to the hole and soaked with a hose to let information technology to gear up quickly and hands. Brace the mail plumb before filling by using 1" ten 4" boards (iv' to 6' long), staking, and screws or duplex nails.

4. 4

   Build a mound at the lesser of the contend mail service. Mound clay around the debate post at ground level, rounding it with a trowel, if you filled in around the mail with soil. This will direct rain and snow melt away from the contend post, as well as help to secure the post in the basis.

   • If you do use concrete, you still want to have a gentle slope away from the post. Fill it halfway with physical and ensure that the postal service is notwithstanding level when you lot install. Let the physical cure properly, then fill the rest of the hole with dirt.

5. 5

   Set the height between the fence posts with twine. In most pre-fab kits, twine is used to connect the contend posts to the stakes and make sure that everything volition be installed at an even height to match the fencing panels. If you're installing your own fencing, yous tin use the same technique.

   • Tie twine to a corner or end mail, about 6 inches (15 cm) from the basis.
   • Stretch the twine taut to the position of the next corner or terminate post. Affix information technology to a stake at the same pinnacle to employ equally a reference.

6. vi

   Repeat with the rest of the posts. Set the corner and end posts first, using your twine equally a height reference. Continue on, repeating the steps above until you've installed all the fence posts.

   • Before seating each one, double-bank check the precise distance between posts with a tape measure.

Advertisement

1. 1

   Connect the commencement two fence posts. Depending on what kind of fence you're installing, you might need to either install a cross-beam to provide yourself something to attach individual fence panels onto, or you might simply ready the large slice of contend paneling and slot information technology into the fence posts. Each fence will be different, so you'll need to proceed according to your ain plans for the fence if yous're making your own, or following the directions of the contend kit yous purchased.

   • If y'all're cutting your ain panels or fence slats, install cross-beams with forest-screws between each fix of debate posts. You tin can either employ a crossing "Ten" blueprint, or flat beams parallel to the basis, depending on what you're going for. Cut fence panels of the appropriate peak for your fence.
   • If you're installing a pre-fab fence, most panels volition be quite big, but yous'll need to install a mail between every panel, meaning that you might need to install more than posts every bit you work. You can either install a mail, adhere the panel and support it while you dig the next post, or get effectually and install all the posts before you start inserting the panels. Caryatid recently installed posts during this process to ensure adequate panel support while the postal service fill cures or sets.

2. two

   Adhere each panel with screws. While you work, information technology's usually a good idea to employ 2-three inch galvanized wood screws to attach your panels securely. Drill airplane pilot holes to keep the woods make clean and abrupt-looking, then install enough wood screws to adhere the panels deeply.

3. 3

   Back up the fence panels as yous work. Any kind of argue you're installing, information technology'south a skilful idea to support the crossbeams with some supporting blocks to avoid putting stress on the wood as you work. You can apply wooden wedges to level the panel.

4. 4

   Keep installing paneling. The hardest role of installing the fence is getting the posts dug and seated deeply. Later that, it's just a affair of filling in the rest with panels or planks. Take your time to measure each new piece of paneling for plumb with your carpenter's level and install each securely according to the directions.

Advertisement

Add together New Question

• Question

  How practice you lot install an inside corner when the horizontal pieces are on the outside of the g?

  

  Anthony "TC" Williams is a Professional person Landscaper in Idaho. He is the President and Founder of Aqua Conservation Landscape & Irrigation, an Idaho Registered Landscape Business Entity. With over 21 years of landscaping experience, TC has worked on projects such as the Idaho Botanical Garden in Boise, Idaho. He is a Idaho Registered Contractor and a previously Licensed Irrigator in the State of Texas.

  

  Experienced Landscaper

  Expert Answer

  To install an within corner when the horizontal pieces are on the outside of the yard, set the console or pickets affluent to the outside of the post.

Ask a Question

200 characters left

Include your e-mail address to become a bulletin when this question is answered.

Submit

Advertisement

Things Y'all'll Need

• Fencing posts
• Fencing panels
• Wood stain
• Paint castor
• Wood preservative
• Posthole digger
• Tarp
• Gravel
• Shovel
• Carpenter'south level
• Stakes
• Twine or line
• Wedges
• ii 1/ii-inch galvanized screws
• Screwdriver or drill/driver
• 1" x 4" boards (iv' to 6' long)
• Staking
• Duplex nails or additional screws
• Wheelbarrow or concrete mixer and h2o source that tin can be easily shut on & off (if using physical)

About This Article

Article Summary 10

To install fencing, first past measuring the area y'all want to fence so that you know how many panels and posts you demand to buy. Next, plant a small stake at each corner to mark the spots clearly. And then, dig the hole for the first post, making certain that it'due south twice the bore and one-3rd of the height of the postal service itself. Position the starting time postal service in the hole and go on digging holes until you've placed all of the posts. Finally, put fence panels between the posts to connect them and install the panels with screws. For tips on using crossbeams and other supports, read on!

Did this summary help y'all?

Thanks to all authors for creating a page that has been read 41,893 times.

Did this article help you?

pottshisto1972.blogspot.com

Source: https://www.wikihow.com/Install-Fencing

Share this post